Open the Slots Dialog Box

1. From the File > OpenComms Settings > ISP dialog select the Slots tab.
2. The Slot Editor dialog box opens.

   

Edit a Slot

1. Select a slot from the Slot List. Highlighting the slot loads the information into the dialog box.
2. Edit the Slot Editor input fields as necessary.
   Note: If fields are unavailable for selecting, this means that the slot is in use and cannot be modified.
3. Click Update to save changes into the spec file.

Create a Slot

1. Key in the slot ID in the database field.
2. Click Add to save the slot into the spec file and to make the dimension and type fields available.
3. From the Slot Type pull-down menu, select a slot type. Backed: front only; Hollow: goes through, front to back.
4. Enter the Width and Height of the current slot.
5. Click Update to save the slot into the spec file.

Delete a Slot

1. Highlight the name in the Slot List.
2. Click Delete to remove the slot from the spec file.
   Note: A Slot model that is in use within a project cannot be deleted. In order to delete a Slot model from the Slot Editor dialog, all of that particular Slot model must be replaced in the existing network before it can be removed.